Step 1 of 8
What type of retaining wall do you need?
Select the wall type that best matches your project. Not sure? Choose the closest match — we can help you refine it once you have your budget.
Cantilever
Gravity
Gravity (cont.)
Geogrid
Continue →
Step 2 of 8
Enter your wall dimensions
Add each wall separately. Heights are rounded up to the nearest budget bracket, and we work out the total area as you type.
Wall 1
✕
+ Add another wall
Total wall area
2 m²
Total length
2 m
Structural assessment required. One or more walls exceed
1.0m, so a structural engineer's design is a legal requirement above this height.
← Back
Continue →
Step 3 of 8
Do you have a structural engineer's design?
One or more of your walls exceeds 1.0m. Above this height a
structural engineer's design is a legal requirement.
← Back
Continue →
Step 4 of 8
Structural engineering information
To help us build an accurate budget for your structural design, tell us what you already have.
Documents you have
Project details
How many separate wall heights need to be designed?
Design fee included in your budget: £850
← Back
Continue →
Step 5 of 8
Who will carry out the work?
← Back
Continue →
Step 6 of 8
What part of the process are you at?
When is the project likely to start?
← Back
Continue →
Step 7 of 8
We've built your budget — who shall we send it to?
Your indicative budget is ready. Enter your details and we'll send a full summary to
your inbox — no sales calls, no hard selling.
About the project
Your contact details
Which best describes you?
What type of construction professional?
← Back
View my budget →
Your instant budget
Retaining wall budget estimate
Inclined Concrete Block · 16 m² · 5 m · Self-build
Prepared for hj hj · 28 July 2026
Small project advisory
Your total wall length (5 m) is under 50m. These rates are optimised for projects
of 50m and above — for smaller projects the cost per m² is typically higher, and we strongly
recommend booking a consultation before proceeding.
Self-build + professional fees
£7,990
Excluding VAT · indicative estimate based on assumed conditions
Wall type
Inclined Concrete Block
Wall area
16 m²
Wall cost breakdown
Wall 1 — 1m × 1m
1m rate bracket · £392/m² · 1 m²
£333
Wall 2 — 4m × 2.5m
4m rate bracket · £731/m² · 10 m²
£6,214
Wall cost subtotal
£6,547
Professional fees
Initial retaining wall consultation
£100
Structural design fee (3 wall heights)
£1,300
Contractor finding support
£500
Professional fees total
£1,900
Rates include
- ✓Earthworks to reduce levels
- ✓Wall materials & stone fill
- ✓Delivery to site (England, Scotland, Wales)
- ✓Concrete foundation, formwork & reinforcement
- ✓Full installation of the wall
- ✓Drainage behind the wall
- ✓Backfilling with clean stone over the drain
- ✓Contractor’s overheads & profit (15%)
- ✓Good access to the works assumed
Rates exclude
- —Structural design & specifications
- —Small works under 50m in length
- —Contractor’s risk allowance
- —Access preparation & hardstanding
- —Removal of excavated spoil off-site
- —Excavation in hard ground
- —Excavation within the water table
- —Demolition of existing walls / structures
- —VAT
Please note: the rates in this budget are indicative only, based on a
50m+ wall length and assumed ground conditions. Rates vary with the scale of the project, location, site
constraints and ground conditions. Use this estimate as a guide only and obtain detailed quotes before
committing to costs.
Ready to take the next step?
Book a consultation with a retaining wall professional
Up to 1 hour · online call · with Bob Evans, Director. Review
your budget and get expert guidance on the right solution — no hard sell, just good advice.
Book a retaining wall consultation
Up to 1 hour · online call with Bob Evans
Choose your time
Start a new estimate